Mercedes-Benz Sprinter Operating Instructions Manual page 195

On-board computer (vehicles with steering wheel buttons)
Switching surround lighting on or off
Using the steering wheel buttons
Press the V or U button repeatedly
X
Settings
until the menu appears in the
display.
Press the 9 button to switch to the sub-
X
menu selection.
Press the W or X button to select the
X
Lighting
submenu.
Press the 9 button to select the
X
lighting
function.
The selection marker is on the current set-
ting.
Press the W or X button to switch
X
On
the surround lighting
If you switch the surround lighting to On, the
following lamps light up in the dark after you
have unlocked the vehicle using the key:
the parking lamps
R
the tail lamps
R
the license plate lamps
R
the fog lamps
R
The surround lighting automatically switches
off after 40 seconds or if you:
open the driver's door
R
insert the key into the ignition lock
R
lock the vehicle using the key
R
Setting the exterior lighting delayed
switch-off
In the
whether and for how long you wish the exte-
rior lighting to remain on after closing the
doors.
Using the steering wheel buttons
Press the V or U button repeatedly
X
until the
display.
Press the 9 button to switch to the sub-
X
menu selection.
Press the W or X button to select the
X
Lighting
Press the 9 button to select the
X
lamps
The selection marker is on the current set-
ting.
Loc.
Press the W or X button to select
X
whether and for how long you wish the
exterior lighting to remain on.
If you have set the delayed switch-off and
switch off the engine, the following remain lit:
Off
or .
the parking lamps
R
the tail lamps
R
the license plate lamps
R
the fog lamps
R
You can reactivate this function by open-
i
ing a door within 10 minutes.
If, after switching off the engine, you do not
open a door or you close an open door, the
exterior lighting switches off after
60 seconds.
Vehicle submenu
Setting the windshield wiper sensitivity
You can use the
the sensitivity of the rain/ light sensor.
Headlamps
submenu, you can set
Settings
menu appears in the
submenu.
function.
Wipe sensor
function to set
193
Head
Z