Mercedes-Benz Sprinter Operating Instructions Manual page 295

Each tire that is affected by a significant loss
of pressure is highlighted in the pressure dis-
play.
Restarting the tire pressure monitor
When you restart the tire pressure monitor,
the currently set tire pressure are taken as
reference values for monitoring.
In most cases, the tire pressure monitor
detects the new reference values automati-
cally, e.g. after you have:
changed the tire pressure
R
changed wheels or tires
R
installed new wheels or tires
R
However, you can also define reference val-
ues manually as described here.
Before restarting the tire pressure moni-
tor:
Set the tire pressure to the value recom-
X
mended on the Tire and Loading Informa-
tion placard or the tire pressure table on
the B-pillar on the driver's side
( page 288).
Y
Observe the notes on tire pressure when
doing so ( page 288).
Y
Make sure that the tire pressure is correct
X
on all four wheels.
Restarting the tire pressure monitor
(vehicles without steering wheel but-
tons):
Turn the key to position 2 in the ignition
X
lock.
Press the 4 menu button on the instru-
X
ment cluster repeatedly until the display
shows the following message:
+CAL- TPMS
Press the f button on the instrument clus-
X
ter.
The display shows:
OK TPMS
The tire pressure monitor activation proc-
ess has begun. The tire pressures meas-
ured for the individual wheels are stored as
the new reference values, provided that the
tire pressure monitor considers them to be
plausible.
If you wish to cancel the restart:
Press the g button or the 4 menu button
X
on the instrument cluster.
The activation process is canceled auto-
matically if 30 seconds elapse without
input.
Restarting the tire pressure monitor
(vehicles with steering wheel buttons):
Turn the key to position 2 in the ignition
X
lock.
Press the V or U button on the steer-
X
ing wheel until the standard display
( page 187) appears in the display.
Y
Press the 9 or : button on the steer-
X
ing wheel repeatedly until the current pres-
sure of the individual tires is displayed or
the display shows the following message:
Tire pres. displayed after driving
for several minutes
Press the 9 reset button on the instru-
X
ment cluster.
The display shows the following message:
Monitor current tire pressure?
Press the W button on the steering
X
wheel.
The display shows the following message:
Tire pres. monitor reactivated
The tire pressure monitor activation proc-
ess has begun. The tire pressures meas-
ured for the individual wheels are stored as
the new reference values, provided that the
tire pressure monitor considers them to be
plausible.
If you wish to cancel the restart:
Press the X button on the steering
X
wheel.
Tire pressure
293
Z