Mercedes-Benz Sprinter Operating Instructions Manual page 102

Changing bulbs
100
Do not use a bulb that has been dropped or
R
that has scratches on its glass tube.
The bulb could explode.
Only use bulbs in closed lamps which have
R
been designed for this purpose.
Only use spare bulbs of the same type and
R
with the prescribed voltage
Protect the bulbs from moisture when in
R
use.
If the new bulb still does not light up, consult
a qualified specialist workshop.
Have the LEDs and bulbs of the following
R
lamps changed at a qualified specialist
workshop:
the additional turn signals in the exterior
-
mirrors
the high-mounted brake lamp
-
LED daytime running lamps (Bi-Xenon
-
headlamps)
Bi-Xenon lamps (Bi-Xenon headlamps)
-
front fog lamps
-
If you require assistance changing bulbs, con-
sult a qualified specialist workshop.
Front bulbs
Overview of bulb replacement – bulb
types
The following bulbs can be replaced. Bulb
types can be found in the legend.
Vehicles with halogen headlamps
Turn signal: PY21W
:
Daytime running lamps: W21W
;
Low-beam headlamps: H7 55W
=
High-beam headlamps: H7 55W
?
Parking lamps/standing lamps: W5W
A
Vehicles with Bi-Xenon headlamps
Turn-signal: NAK 3457
:
Additional turn signals in the exterior mir-
ror (not for all-wheel-drive vehicles):
HPC 16WY
Low-beam headlamps and high-beam
headlamps/cornering lamp
Example (halogen headlamps)
Switch off the lighting system.
X
Open the hood ( page 248).
X
Y
Turn housing cover : in the direction of
X
the arrow and remove it.