Specifying A New Pc Folder - Kyocera 255b Operation Manual

Sending > Specifying Destination

Specifying a New PC Folder

Specify either the desired shared folder on a computer or an FTP server as the destination.
NOTE
Refer to Creating a Shared Folder on page 6-7 for details on how to share a folder.
Be sure that SMB Protocol or FTP in the COMMAND CENTER is On. For details, refer to the KYOCERA COMMAND
CENTER Operation Guide.
1
2
3
Display the screen.
1
Referring to Basic Operation on page 6-2, display the screen.
2
Ready to send.
Send
Recall
One Touch Key Address Book Ext Address Book
E-mail Folder FAX
Functions
Select the folder type.
Ready to send.
Folder
SMB Path Entry
FTP Path Entry
Cancel
Enter the destination information.
Enter the next information. Once you have entered one item, press [Next] to advance to the
next item.
For send to folder (SMB)
Item
Host Name
Path
10:10
Dest. :
Check
1/2
Favorites
10:10
1/1
Next >
1
2
Data to be entered
Host name or IP address of the PC to receive
the data.
Path to the receiving folder such as follows.
For example, \User\ScanData.
6-19
Max. characters
Up to 64 characters
Up to 128 characters