Sending Functions - Kyocera 255b Operation Manual

Sending > Sending Functions

Sending Functions

Send screen shows the commonly used functions. By pressing [Functions], other selectable functions will be shown as
a list. Use [ ] or [ ] to select the function.
Select the file format for images being sent.
Specify the original size.
Specify the original orientation to scan in the correct direction.
Send mixed size originals.
Automatically scan 2-sided originals.
Change the size of the image being sent.
Send each page in a separate file.
Set the resolution at which to scan originals.
Adjust the density.
Change the color mode for images being sent.
Select original image type for best results.
Emphasize the outline of texts or lines.
Blur the image outline.
Darken or lighten the background (i.e., the area with no text or images) of originals.
Prevent bleed-through for 2-sided originals.
Enlarge or shrink originals according to the sending size.
Scan a large number of originals separately and then produce as one job.
Add a file name to the job to easily check its status.
Add an E-mail subject and body (when sending E-mail).
Send notice by e-mail when a job is complete.
Encrypt your message.
Send a image to a WSD-compatible computer.
NOTE
This section does not include fax settings. For details on fax operation, refer to the FAX Operation Guide. Fax
functionality requires the optional fax kit.
What do you want to do?
6-36
Reference Page
File Format page 3-58
Original Size page 3-32
Original Orientation page 3-34
Mixed Size Originals page 3-35
2-sided/Book Original page 3-37
Sending Size page 6-37
File Separation page 6-39
Scan Resolution page 3-52
Density page 3-51
Color Selection page 3-60
Original Image page 3-53
Sharpness page 3-54
Background Density Adjust
page 3-55
Prevent Bleed-through page 3-56
Zoom page 3-57
Continuous Scan page 3-40
File Name Entry page 3-63
E-mail Subject/Body page 6-40
Job Finish Notice page 3-61
FTP Encrypted TX page 6-41
WSD Scan page 6-42