Proof And Hold - Kyocera 255b Operation Manual

Printing > Printing Data Saved on the Printer

Proof and Hold

Proof and Hold stores the print data which is printed by using the printer driver as a Proof and Hold Print job.
Refer to the Printer Driver User Guide on how to print a job as Proof and Hold Print job using the printer driver.
NOTE
RAM disk mode must be enabled. RAM disk mode can be used when optional memory has been installed.
For details, refer to RAM Disk Setting on page 9-23.
Setting the Number of Stored Jobs
To maintain free space on the RAM disk, you can set the maximum number of stored jobs.
1
2
Display the screen.
1
Enter the maximum number of stored jobs.
System Menu/Counter.
Job Box - Quick Copy Job Retention
(0 - 50)
1
Cancel
You can enter any number between 0 and 50.
NOTE
If you enter a value of 0 (zero), you cannot use the Proof and Hold function.
System Menu/Counter.
System Menu
Send
Document Box
FAX
System Menu/Counter.
Document Box
Address Book/One Touch
Sub Address Box
Job Box
Polling Box
10:10
job(s)
2
OK
5-7
10:10
2
3/5
3
System Menu/Counter.
Document Box - Job Box
Quick Copy Job Retention
< Back
4
Deletion of Job Retention
< Back
10:10
1/1
10:10
32job(s)
Off
1/1