Obtain Network User Property - Kyocera 255b Operation Manual

Setup, Registration, and User Management > User Login Administration

Obtain Network User Property

Set the required information to obtain the network user property from the LDAP server.
NOTE
To obtain the network user property from the LDAP server, [Network Authentication] must be selected for the
authentication method and [NTLM] or [Kerberos] must be selected as the server type in Enabling/Disabling User Login
Administration on page 9-29.
Server Name*
Port
Name 1**
Name 2***
E-mail Address****
Search Timeout
* If using Active Directory of Windows, the server name may be same as the server name entered in the network authentication.
** If using Active Directory of Windows, displayName of Attribute may be used as Name 1.
*** Name 2 can be left out. When you assign displayName in Name 1 and department in Name 2, and if the value of displayName
is "Mike Smith" and the value of department is "Sales" in Active Directory of Windows, the user name appears as Mike Smith
Sales.
**** If using Active Directory of Windows, mail of Attribute may be used as E-mail Address.
1
2
Enter the LDAP server name or the IP address (up to 64 characters).
Set the LDAP port number or use the default port 389.
Enter the LDAP Attribute to obtain the user name to be displayed from the LDAP server (up to 32
characters).
Enter the LDAP Attribute to obtain the e-mail address from the LDAP server (up to 128 characters).
Set the amount of time to wait before time-out in seconds (from 5 to 255 seconds).
Display the screen.
1
Referring to User Login Settings on page 9-28, display the screen.
2
System Menu/Counter.
User Login/Job Acco... - User Login Setting
Obtain NW User Property
< Back
Use [ ] or [ ] to scroll up and down.
Configure the function.
[Server Name]
System Menu/Counter.
Obtain NW User... - LDAP Server Information
Server Name
1
Port 389
Name 1 displayName
Name 2
Cancel < Back
Up to 64 characters can be entered.
Refer to Character Entry Method on page 11-7 for details on entering characters.
10:10 System Menu/Counter.
User Login Setting - Obtain NW User Property
1
Off
Off
On
2/2
10:10
1/2
OK
9-50
10:10
1/1
2
Cancel OK
3
2