ashtech ZY-12 Information Supplement page 64

2. Using the down arrow, and the left and right arrows, highlight INSERT. The
selected waypoint blinks.
3. Press [e] and waypoint 01 is added. The waypoint previously in that position
moves one location to the right and the added way point blinks.
4. Move the cursor up to the route field to edit the newly entered waypoint and
press [e] to save.
5. Press [e] or [c] to return to Screen 6.
The FLIP function allows you to reverse the order of the waypoints in the route.
1. Using the down arrow and the left or right arrows, highlight FLIP.
2. Press [e] and the order of the waypoints in the route reverses. The last point
is the first destination point of the previous route.
3. Move cursor to route field and press [e] to save change.
4. Press [e] or [c] to return to Screen 6.
5: Restart Route
The restart function allows you to instruct the receiver to modify the route
according to two options available: restart the route from the beginning or restart
the route from the nearest waypoint to your present position.
To select this function do the following:
1. Select RESTART ROUTE and press [0] (Figure 3.34).
2. Using the + or - keys, toggle between "start at beginning" and "start at nearest".
Select one.
58
Figure 3.34. Restart Route
ZY-12 GPS Receiver