ashtech ZY-12 Information Supplement page 67

To use this function, highlight RANGE/BEARING and press [e] (Figure 3.37).
Figure 3.37. Route Display
The display shows the route being followed. One of the legs is highlighted and the
coordinates of the waypoints associated with this leg are being displayed in the
next two lines. The last line shows the bearing and range values for that leg. To
display the range and bearing for a different leg, use the left and right arrows to
move the cursor, and the information automatically displays at the bottom of the
screen. Press [e] or [c] to return to the main screen.
8: Unit Selection
This function allows you to specify the units (miles, knots, kilometers) used to
display the ALT (altitude), SOG (speed over ground), DTD (distance to
destination), and XTE (cross track error) values in Screen 2.
61
Screen Descriptions