Subcommands Subscreen - ashtech ZY-12 Information Supplement

Subcommands Subscreen

The SUBCMDS option lets you enter system-level commands; this can also be
done through Screen 8. To enter a command, go to Screen 4 and select the
SUBCMDS option (Figure 3.21).
To enter a system-level command, press [e] for data-entry mode, then use the
numbered keys to enter a 3-digit command. For example, to save user
parameters, enter the numeric command [5], [5], [5] into the data-entry field and
press [e] again. The receiver executes the command and returns you to Screen 4.
Table 3.17 lists the available commands.
Command
100 Turn off backlighting after 2 minutes since last key press. (Default)
101 Keep backlighting on. Warning: if backlighting is on, the receiver draws
significantly more power.
123 Close a file.
191 Initialize the modem.
300 Enter/display position in Screen 4 in deg/min format (default)
301 Enter/display position in Screen 4 in deg/min/sec format.
550 Reset receiver to original default values.
555 Save user parameters
Screen Descriptions
Figure 3.21. Subcommands Subscreen
Table 3.17. Available Commands
Function
45