ashtech ZY-12 Information Supplement page 62

4. Press [e] to return to the main screen.
The HERE function allows logging the current position into a selected waypoint
(similar to the LOG POSITION option).
1. Select a waypoint with the waypoint number highlighted and using the up and
down arrows, or the numbered keys.
2. Using the cursor, highlight the HERE field and press the [e] key. The current
position logs to that waypoint position and the information displayed on the
screen. The waypoint renames to HERE_XX, where XX is the next sequential
number assigned to a logged position beginning from 01.
3. From the data field, press the [e] key to save the changes. If desired, you can
edit a new waypoint.
4. Press [e] to return to the main screen.
The COPY FROM function allows you to copy the information of one waypoint to
another.
1. Using the up and down arrows, or the numbered keys, select the waypoint
you want to copy TO.
2. Using the cursor keys, highlight COPY FROM. A waypoint displays by the
COPY FROM field and its coordinates display at the bottom of the screen. Using
the up and down arrows, or the numbered keys, select the waypoint you want
to copy FROM, as shown in Figure 3.32.
3. Press [e] and the FROM waypoint information is copied to the TO waypoint.
Edit the copied information if necessary.
4. From the data field, press [e] to save the waypoint.
If desired, you can now edit a new point. If not, press [e] to return to Screen 6.
56
Figure 3.32. Copy Waypoint From
ZY-12 GPS Receiver