ashtech ZY-12 Information Supplement page 60

set to AUTOMATIC. If instead, MANUAL is selected, the receiver displays a
specific set of selected waypoints. To save this selection and return to the main
menu, press [e].
To define the set of waypoints displayed in MANUAL mode, proceed as follows:
1. Highlight the function "SET DISPLAY" and press [e]. A simulation of Screen
6, without the route, displays (Figure 3.30).
2. The first record entry number is highlighted. Using the up and down arrows,
scroll through the list until the desired waypoint is found. Or, using the numbered
keys, enter the waypoint number, and the name and coordinates of that
waypoint displays.
3. Using the right arrow, select the next waypoint.
4. Continue selecting until satisfied.
5. Press [e] and the set of selected waypoints display in Screen 6.
To return Screen 6 to the waypoints list, select AUTOMATIC.
3: Edit Waypoint
This function lets you create, edit and/or clear a waypoint, and to copy the
information of one waypoint to another.
54
Figure 3.30. Screen 6 - Without Route
ZY-12 GPS Receiver