Screen 9 - Site And Session Control; Site And Session Control - ashtech ZY-12 Information Supplement

Screen 9 - Site and Session Control

Use Screen 9 (Figure 3.43) to enter information about a specific site. Site
information can be entered during data collection and does not affect or interrupt
the collection process. Table 3.23 describes the screen parameters.
Figure 3.43. Screen 9 - Site and Session Control
Table 3.23. Site and Session Control Parameters
Parameter
SITE The name of a site, 4 alphanumeric characters, tagged with the raw data
in order to record which site you were occupying during that time period.
This same site identifier is used to name your data files when you are
transferring them to your computer. If you forget to enter a site name, you
can fix it during downloading.
SESS The identifier (letter or number) of the session. The download software
puts in this parameter while you are downloading to the PC after data
collection. However, if you wish to override the default sessions, you may
enter a letter or number here.
RCV# The receiver identifier, three alphanumeric characters.
ANT# The antenna identifier, three alphanumeric characters. Entering the last
three digits of the antenna and receiver serial number is good practice in
case there are problems with the equipment.
MMDD Indicates the month and day of the session.
OPR Identifies the operator, 3 alphanumeric characters.
CODE Can contain up to 13 alphanumeric characters of user comment to further
identify a site.
Screen Descriptions
Description
69