Using The Select Switch (Option) - Brother DH4-B981 Instruction Manual

6-6. Using the select switch (option)

The select switch can be used to select a single program from either program A, program B or program C. The
settings which are recorded for each program include the stitch length and whether cutting is turned on or off.
All other settings are the same for all programs.
* When the power is turned on and the start switch is pressed, the feed bracket moves to the cloth setting position.
* Select the program or change the program settings when the sewing machine is in this condition.
The programs are set as follows at the time of shipment
from the factory.
1. Selecting a program
Selecting program A
Selecting program B
Selecting program C
2. Changing the program settings
RESET
q
e
3. Using the RESET switch
The RESET switch functions in the same way as the RESET switch on the operation panel. Operate it in the same
way as the RESET switch on the operation panel.
A B C
Press switch A. Indicator A will then illuminate.
A B C
Press switch B. Indicator B will then illuminate.
A B C
Press switch C. Indicator C will then illuminate.
A B C
r
w
t
Stitch length
Cutting on/off
Example: Changing the settings for program A (stitch
0922Q
Example: length = 20 mm, cutting off) to a stitch length of
Example: 22 mm with cutting on.
1. Press switch A q so that indicator A illuminates.
2. Press the "Up" switch w or the "Down" switch e so
2. that "22" is displayed in the number display window
r.
2.
0923Q
3. Press the KNIFE switch t so that the KNIFE indicator
3. illuminates.
This completes the changing if the program settings.
0924Q
DH4-B981
6. USING THE OPERATION PANEL
Program A Program B
20 mm 20 mm
Off Off
Program C
20 mm
Off
0921Q
39