Moving The Cloth Feed Bar (-52 Specifications); Using The Memory Switch - Brother DH4-B981 Instruction Manual

6. USING THE OPERATION PANEL

6-7. Moving the cloth feed bar (-52 specifications)

q

6-8. Using the memory switch

The conditon of the memory switch is memorized even if the power is OFF, however, if data of the memory switch is
initialized, the memory switch will become OFF.
The memory switch is OFF at shipment.
q
No. ON/OFF
ON
0
*1
OFF
ON
1
*1
OFF
ON
2
*2
OFF
ON
3
*3
OFF
4 - 9, ON
A - F
OFF
*1 The version of the PROM is given as "B" or later.
*2 The version of the PROM is given as "C" or later.
*3 The version of the PROM is given as "D" or later.
40
w
e
Adds 0.3 mm to normal setting value of cutting space.
Moves feed bracket forward with work clamp kept raised when workpiece is placed forward.
Setting range of stitch length for L7 = 36 - 42 mm
(Taper bar length should be 4 mm or more.)
Setting range of stitch length for L7 = 36 - 40 mm
Offset when Panel DIP switch B - 4 is ON = 1.3 mm
Offset when Panel DIP switch B - 4 is OFF = 1.4 mm
While pressing the RESET switch q, press the "Up" switch
w or the "Down" switch e.
The cloth feed bar will then move in the right direction or
the left direction.
* This operation is only possible when the cloth feed plate
* is in the left setting position (home condition).
0925Q
1. Turn on the power, while pressing the KNIFE switch
q.
2. Set the desired memory switch number at the left of
the number display window r by pressing the "Up"
switch w or "Down" switch e.
r
3. Set the knife to ON ("
the KNIFE switch q.
*This is indicated at the right of the number display
window r.
4. The contents of the memory switch are entered by
w
pressing the start switch, and the normal starting
condition will be ready ("--" is displayed).
e
0926Q
Description
Normal
Normal
Normal
Spare
DH4-B981
") or OFF (" ") by pressing