Tera Gear TG 1201 2561 Instruction Manual page 12

Step 13 (Heat plate, cooking grid and warming rack
assembly)
a) Place the heat plates (P) onto the heat plate support.
b) Place the cooking grids (Q) upon the heat plates.
c) Place the warming rack (R) on the warming grid support
as shown.
d) Close the top lid.
GSS3220AN
Instruction Manual
Step 14 (Heat insulator panel & grease pan
a) Loosen the three pre-installed bolts on the
grease pan (W) and align the holes on the
heat insulator panel (V) with the extended
bolts, push down the heat insulator panel
until it locks into place. Tighten by hand until
secure.
11
Step 12 (Wire assembly)
a) Insert the transformer wire through
the slots on the side panel and then
insert the two ends of the light wire
from above with the two ends of the
transformer wire.
assembly)