1. Manuals
  2. Brands
  3. Tera Gear Manuals
  4. Grill
  5. 13 01 3008TG
  6. Assembly instructions and owner's manual

Tera Gear 13 01 3008TG Assembly Instructions And Owner's Manual

Stainless steel 60,000btu bbq natural gas
Hide thumbs
Table of Contents

Advertisement

Quick Links

Loblaws Inc.,
1 President's Choice Circle,
Brampton, Ontario
L6Y 5S5
Stainless Steel 60,000BTU BBQ

natural gas

assembly instructions and
owner's guide
WARNING
You must read this owner's guide before operating
your gas grill. Failure to follow these instructions
could result in fire or explosion that could cause
property damage, personal injury or death.
For your safety: This gas appliance is designed
for outdoor use only and shall not be used in a
building, garage or any other enclosed area.
Do not use in or on boats or recreational vehicles.
TG3008 NG U&C-2012 FA.indd 1
WARNING
1. Improper installation, adjustment, alteration,
service or maintenance can cause injury or
damage to property.
2. Read the assembly, installation, operation and
maintenance thoroughly before assembling,
installing, or servicing the equipment.
3. Failure to follow these instructions could result
in fire or explosion which could cause property
damage, personal injury or death.
1
natural gas
MODEL NUMBER:
13 01 3008TG
SERIAL NUMBER:
12-09-26 4:36 PM

Advertisement

Table of Contents
loading

Related Manuals for Tera Gear 13 01 3008TG

Summary of Contents for Tera Gear 13 01 3008TG

  • Page 1: Natural Gas

    Loblaws Inc., 1 President’s Choice Circle, Brampton, Ontario L6Y 5S5 MODEL NUMBER: Stainless Steel 60,000BTU BBQ 13 01 3008TG natural gas SERIAL NUMBER: assembly instructions and owner’s guide WARNING WARNING You must read this owner’s guide before operating 1.

  • Page 2: Safety Instructions

    Safety Instructions THIS GAS APPLIANCE IS DESIGNED FOR OUTDOOR USE ONLY. DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flames. 3. Open the lid. 4. If odor persists, keep away from the appliance and immediately call your gas supplier or the fire department.

  • Page 3: Table Of Contents

    Table of Contents General Warnings Assembly Instructions Connecting to Natural Gas Supply Leak Testing Operating Main Burners Operating the Side Burner Cleaning Seasonal Cleaning Tips for Cooking Trouble Shooting BEFORE USING THIS GRILL PERFORM THE SAFETY CHECK. 1. Read and understand the manual. 2.

  • Page 4: General Warnings

    General Warnings Do not put a barbecue cover or anything flammable on or in the storage area under the barbecue or on the side shelves. Keeping outdoor cooking gas appliance area This barbecue is not convertible to propane. Any clear and free from combustible materials, gasoline and attempt to do so could result in injury or damage to other flammable vapors and liquids.
  • Page 5 Keep any electrical supply cord and the fuel supply hose During high pressure testing, in excess of 1/2 psi (3.5kPa) away from any heated surfaces and the grease cup and your gas grill and its individual shutoff valve must be tray where hot grease could drip down.

  • Page 6: Assembly Instructions

    Parts List Assembly Instructions CODE PART INTRODUCTION Fire Box Assembly Do not return this product to store. Warming Rack For assistance call Customer Service at 1-800-737-8815. Cooking Grill Please have the following information available. Heat Tent Serial Number Grease Tray Assembly The serial number can be found inside the front left door of the barbecue on the top left hand corner of the rating Grease Cup...

  • Page 7: Parts Diagram

    Parts Diagram TG3008 NG U&C-2012 FA.indd 7 12-09-26 4:36 PM...
  • Page 8 Hardware Reference Diagram 1:1 SCALE CODE PART M6x12mm Bolt M6x8mm Bolt M5x8mm Bolt M6x40mm Bolt Washer M4x10mm Bolt TG3008 NG U&C-2012 FA.indd 8 12-09-26 4:36 PM...
  • Page 9 Assembly STEP 1 Attach the Left Front Leg (16) and Right Front Leg (18) to the Bottom Shelf Assembly (26) using one M6x12mm Bolt on each leg (A). Tighten the bolts with the screwdriver. 1:1 SCALE STEP 2 Attach the Left Rear Leg (17) and Right Rear Leg (19) to the Bottom Shelf Assembly (26) using one M6x12mm Bolt (A) on each leg.
  • Page 10 Assembly STEP 3 A. Attach the Right Cart Side Panel (22) to the Right Front Leg (18) and Right Rear Leg (19) using four M6x12mm Bolts (A). Tighten the bolts with the screwdriver. B. Attach one of the Cart Support Brackets (28) to the Right Rear Leg (19) and the Bottom Shelf Assembly (26) using two M6x12mm Bolts (A).
  • Page 11 Assembly STEP 4 A. Attach the Left Cart Side Panel (21) to the Left Front Leg (16) and Left Rear Leg (17) using four M6x12mm Bolts (A). Tighten the bolts with the screwdriver. B. Attach the Cart Support Bracket (28) to the Left Rear Leg (17) and the Bottom Shelf Assembly (26) using two M6x12mm Bolts (A).
  • Page 12 Assembly STEP 5 A. Attach the two Locking Casters (33) to the Left Rear Leg (17) and the Right Rear Leg (19). B. Attach the two Casters (32) to the Left Front Leg (16) and the Right Front Leg (18). STEP 6 Attach the Bottom Skirt Front (29) on the Bottom Shelf Assembly (26) using four M4x10mm Bolts (F).
  • Page 13 Assembly STEP 7 Attach the Bottom Skirt Right (31) to the Bottom Shelf Assembly (26) and the Bottom Skirt Front (29) using four M4x10mm Bolts (F). Align the edge of the Bottom Skirt Right with the front edge of the Bottom Skirt Front. Tighten the bolts with the screwdriver.
  • Page 14 Assembly STEP 9 Attach the Door Transom (20) to the Left Front Leg (16) and Right Front Leg (18) using two M6x40mm Bolts (D). Tighten the bolts with the screwdriver. STEP 10 A. Ensure the brakes on the locking casters are firmly in the locked “on” position before continuing. B.
  • Page 15 Assembly STEP 12 A. Place the Left Front Door (23) on the left hand door post of the Bottom Skirt Front (29). B. Depress the spring post on the bottom of the Door Transom (20), then align the hole in the top of the door with the spring post.
  • Page 16 Assembly STEP 13 Attach the Side Table Handle (15) to the Side Table Assembly (13) using two M6x12mm Bolts (A) placing a washer (E) on each end between the Side Table Assembly (13) and the M6x12mm Bolts (A). Tighten the bolts with the screwdriver. STEP 14 Place the Side Table Assembly (13) on the Left Rear Leg (17) and...
  • Page 17 Assembly STEP 15 A. Place the Side Burner Assembly (9) on the Right Front Leg (18) and Right Rear Leg (19). B. Attach the Lighting Rod (34) to the Right Rear Leg (19) and Side Burner Assembly (9) using two M6x12mm Bolt (A). C.
  • Page 18 Assembly STEP 16 WARNING: This step requires two people to lift the Fire Box Assembly. Failure to do so may result in personal injury or damage to the BBQ. Place the Fire Box Assembly (1) on top of the trolley attaching the Fire Box Assembly to the Left Front Leg (16), Left Rear Leg (17), the Right Front Leg (18) and...
  • Page 19 Assembly STEP 17 A. From the inside of the fire box attach the Fire Box Assembly (1) to the Side Table Assembly (13) two M6x12mm Bolts (A) placing a Washer (E) between the M6x12mm Bolts (A) and the Fire Box Assembly (1). Tighten the bolts with the screwdriver. TG3008 NG U&C-2012 FA.indd 19 12-09-26 4:36 PM...
  • Page 20 Assembly STEP 17 B. Attach the Fire Box Assembly (1) to the Side Burner Assembly (9) two M6x12mm Bolts (A) placing a Washer (E) between the M6x12mm Bolts (A) and the Fire Box Assembly (1). Tighten the bolts with the screwdriver.
  • Page 21 Assembly STEP 18 A. Attach two M6x8mm Bolts (B) to the Side Burner Control Panel (11). DO NOT TIGHTEN THE BOLTS AT THIS TIME. B. Hang the Side Burner Control Panel (11) on the Side Burner Assembly (9). Slide the Side Burner Control Panel to the left until the Side Burner Control Panel is aligned with the edge of the Side Burner Assembly.
  • Page 22 Assembly STEP 19 A. Loosen the two of the pre-installed screws at the bottom of the side burner (10). B. Remove two of the pre-installed screws from the Side Burner Valve on the hose attached to the Fire Box Assembly (1). C.
  • Page 23 Assembly STEP 19 D. Insert the nozzle of the Side Burner Valve into the supply pipe of the Side Burner. Once aligned tighten the two screws on the Side Burner (10) that were loosened in step 19-A to the Side Burner Assembly (9). IMPORTANT: Make sure that the valve nozzle is properly inserted and aligned.
  • Page 24 Assembly STEP 19 Insert the Side Burner Electrode Wire (8) into the Side Burner Valve. Attach the Side Burner Knob (12) on the side burner control panel (11) by aligning the knob with the post and pressing firmly. TG3008 NG U&C-2012 FA.indd 24 12-09-26 4:36 PM...
  • Page 25 Assembly STEP 20 A. Attach two M6x8mm Bolts (B) to the Side Table Control Panel (14). DO NOT TIGHTEN THE BOLTS AT THIS TIME. B. Hang the Side Table Control Panel (14) on the Side Table Assembly (13). Slide the Side Table Control Panel (14) to the right until the panel is aligned with the edge of the Side Shelf Assembly.
  • Page 26 Assembly STEP 21 Place the Side Burner Grate (7) on the Side Burner Assembly (9) and align with the holes. STEP 22 Place the four Heat Tents (4), two Cooking Grills (3) and Warming Rack (2) on the Fire Box Assembly (1). TG3008 NG U&C-2012 FA.indd 26 12-09-26 4:36 PM...
  • Page 27 Assembly STEP 23 A. From the back of the grill slide the Grease Tray Assembly (5) beneath the Fire Box Assembly (1). B. Slide the Grease Cup (6) into the channels at the bottom of the Grease Tray Assembly (5). TG3008 NG U&C-2012 FA.indd 27 12-09-26 4:36 PM...
  • Page 28 Assembly STEP 24 A. Thread the natural gas hose through the oval opening of the Right Cart Side Panel (22). Be sure that the hose does not touch the Fire Box Assembly (1) or Grease Tray (5) because they become hot during use. B.

  • Page 29: Connecting To Natural Gas Supply

    Assembly C. Pull back Quick Release Collar, connect hose to main gas line. Ensure quick release connector is fully connected to gas line. Natural Gas Supply (not shown) Shut Off Valve Male Pipe Threads Quick Release Connector Hose Side Burner Valve (not shown) NATURAL GAS SIDE BURNER...

  • Page 30: Leak Testing

    Checking for Leaks LEAK-TESTING THE CONNECTIONS 1. Mix ¼ cup of liquid dishwashing soap with ¾ of a It is important to regularly check your hoses and cup of water. connections for leaks. Failure to do so could result in 2.

  • Page 31: Operating Main Burners

    Operating Main Burners CAUTION: If a burner goes out during operation, immediately turn the gas to “OFF/FERMÉ” and open the lid to let the gas clear for five minutes before relighting. LIGHTING THE MAIN BURNER NOTE: The first time you light your barbecue your A) Open the barbecue lid.

  • Page 32: Operating The Side Burner

    Operating the Side Burner Cleaning Your barbecue should be cleaned frequently for long life. Some parts of the barbecue need to be cleaned after LIGHTING THE SIDE BURNER each use. A) Open the side burner hood. B) Ensure side burner is clear. All cleaning and maintenance should be done when the C) Set the control knob to off and turn on the gas supply.
  • Page 33 INSPECTION AND CLEANING OF THE CLEANING THE SIDE BURNER BURNERS AND SPIDER/INSECT SCREENS 1. Turn off the side burner per instructions on page 31. 1. Turn off the main burners per instructions on page 31. 2. Clean the exterior of the side burner with a brass 2.

  • Page 34: Seasonal Cleaning

    Seasonal Cleaning CLEANING YOUR HEAT TENTS The heat tents are an important part of your barbecue. They ensure drippings do not hit your burners directly, CLOSING YOUR BARBECUE FOR THE WINTER which could cause a dangerous flare-up or grease fire. They also allow for drippings to impart that smoky flavour It is important that your barbecue is properly closed for that is associated with barbecued food.

  • Page 35: Tips For Cooking

    Tips for Cooking TIPS FOR BETTER RESULTS ON YOUR GRILL Use the upper cooking grill (warming rack) for keeping cooked food warm, toasting bread or buns, and cooking DIRECT COOKING delicate foods. Cooking directly over hot burners is ideal for searing in Use the side burner of the barbecue like a normal kitchen juices and grilling thinner cuts of meat such as steaks, range for boiling, sautéing or frying.

  • Page 36: Troubleshooting

    Troubleshooting Before calling Customer Service, use the following troubleshooting guide. The troubleshooting guide will help you solve many problems on your own. Burner will not ignite using knobs Wires and/or electrode covered Clean wire and/or electrode with cooking residue with rubbing alcohol Electrode and burners are wet Wipe with a dry cloth Electrode cracked or broken –...

  • Page 37: Troubleshooting

    Troubleshooting Burner flame pattern is erratic. Are the burners clean? Clean the burners. Refer to “Cleaning”. Flame is low when burner is on HI. Flames do not run the whole length of the burner tube. Flame is yellow or orange New burner or grill may have Burn grill for 15 minutes with lid closed.
  • Page 38 Notes TG3008 NG U&C-2012 FA.indd 38 12-09-26 4:36 PM...
  • Page 39 Notes TG3008 NG U&C-2012 FA.indd 39 12-09-26 4:36 PM...
  • Page 40 If you need help or parts call the customer service line at 1-800-737-8815 Call customer service for missing/damaged parts, difficulty with assembly, trouble shooting, warranty assistance or product information. Warranty Proof of purchase is required to access this warranty The original consumer purchaser will be responsible program, which is in effect from the date of purchase.

Table of Contents