Table of Contents
Advertisement
Quick Links
Model Number GPC2700JD-6(1401 3001)
TER 25K BTU PRO 2-Burner Grill
SAVE THESE INSTRUCTIONS FOR FUTURE USE.
IF YOU ARE ASSEMBLING THIS UNIT FOR SOMEONE ELSE,
GIVE THIS MANUAL TO HIM OR HER FOR FUTURE USE.
FOR CUSTOMER SERVICE:
CALL 1-877-630-5396 (TOLL-FREE)
10:00 A.M. – 7:00 P.M. (EST),
MONDAY-FRIDAY
- 1 -
Advertisement
Table of Contents
Related Manuals for Tera Gear TER 25K BTU PRO
Summary of Contents for Tera Gear TER 25K BTU PRO
- Page 1 Model Number GPC2700JD-6(1401 3001) TER 25K BTU PRO 2-Burner Grill SAVE THESE INSTRUCTIONS FOR FUTURE USE. IF YOU ARE ASSEMBLING THIS UNIT FOR SOMEONE ELSE, GIVE THIS MANUAL TO HIM OR HER FOR FUTURE USE. FOR CUSTOMER SERVICE: CALL 1-877-630-5396 (TOLL-FREE) 10:00 A.M.
- Page 2 Grill Operation 1‐2‐3 Before Grilling Step 1 Keep your grill a safe distance away from your property.* Step 2 Always perform a Leak Test on all connections and hoses. * Step 3 Keep children away from the grill. During Grilling (To avoid tripping safety valves, please follow these instructions carefully!) Step 1 First open lid and turn gas tank on slowly. Step 2 Turn only one knob on at a time when lighting up the grill. Step 3 Use protective gloves when grill gets hot. Step 4 Never leave a lit grill unattended. After Grilling Step 1 Always burn grill for 10‐15 minutes to burn off food residues after use. Step 2 ...
-
Page 3: Table Of Contents
Table of Contents For Your Safety.........................4 Illustrated Parts List .........................6 Hardware List...........................7 Assembly Instructions…..………………..................8 Operating Your Grill........................11 Connecting & Disconnecting Gas Cylinder................11 Checking for Leaks........................12 Lighting Your Grill........................12 Excess flow safety valve reset procedure................14 Care and Maintenance......................15 Troubleshooting........................16 Warranty Program........................18 - 3 -... -
Page 4: For Your Safety
For Your Safety IMPORTANT NOTICE: READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND USE Safety First! Read and understand all warnings and precautions prior to operating your grill. WARNING This grill is for outside use only. It should not be used in a building, garage or any other enclosed area. The use of alcohol, prescription or non‐prescription drugs may impair an individual’s ability to properly assemble or safely operate this appliance. Always open the grill lid carefully and slowly as heat and steam trapped within the grill could cause severe burns. Always place your grill on a hard and level surface far away from combustible materials and structures. An asphalt or blacktop surface may not be acceptable for this purpose. Do not leave a lit grill unattended. Keep children and pets away from the grill at all times. This is not a tabletop grill. Do not place this grill on any type of tabletop surface. Do not use the grill in high winds. This grill must be used with propane gas only (propane gas cylinder not included). Do not attempt to attach this grill to the self‐contained propane system of a camper, trailer, motor home or house. Do not use charcoal or lighter fluid. Do not use gasoline, kerosene or alcohol for lighting. The liquid propane (LP) gas supply cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the National Standard of the Transportation of Dangerous Goods Commission of Canada for Cylinders, Spheres and Tubes (CAN/CSA‐B139). This outdoor gas appliance is not intended to be installed in or on recreation vehicles and/or boats. Do not attempt to move the grill while it is lit. Do not use the grill unless it is COMPLETELY assembled and all parts are securely fastened and tightened. Keep combustible items and surfaces at least 6 feet away from the grill at all times. DO NOT use this gas grill or any gas product under any overhead enclosure or near any unprotected combustible constructions. Do not use in an explosive atmosphere. Keep grill area clear and free from combustible materials, gasoline and other flammable vapours and liquids. Do not attempt to use or assemble with missing or damaged parts. Contact customer service for replacement parts. CAUTION ‐ Prevention of Burns To avoid burns, do not touch metal parts of the grill until they have completely cooled for at least 45 minutes or unless you are wearing protective gear such as pot holders, protective gloves or mittens. Do not alter the grill in any manner. Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts or leaks, the hose must be replaced prior to operation. The replacement hose assembly should be in accordance with the manufacturer’s ... - Page 5 Always confirm that this grill is not positioned under the overhang of a house, a garage or other structure before lighting it. An overhang will serve to deflect flare‐ups and radiated heat into the structure itself, which could result in a fire. Always confirm that this grill is positioned more than 50 inches (1.27 M) away from any building or combustible materials or surface before lighting it, and that no gasoline or other volatile substances are stored in the vicinity of this grill. (See diagram to right). The temperature of a grease fire or of the radiated heat might otherwise be sufficient to ignite nearby combustible or volatile substances. Always locate this grill where there will be ample combustion and ventilation air, but never position it in the direct path of a strong wind. Never allow the grill to operate while unattended to prevent uncontrolled grease fires from erupting. Never attempt to move this grill while it is in operation or while it is still hot to prevent possible personal injury. Never store or use gasoline or other flammable or volatile substances in the vicinity of this grill or in the vicinity of any other heat‐generating appliance because of the danger of starting a fire. Always confirm that the installation of this grill conforms to the requirements of all local codes or, in the absence of applicable local codes, with the the Canadian Standards Association's Natural Gas and Propane Installation Code CAN/CGA‐B149.1. DANGER – Gas Safety Liquid propane (LP) gas is flammable and hazardous if handled improperly. Become aware of its characteristics before using any propane product. ● Propane Characteristics: Flammable, explosive under pressure, heavier than air and settles in pools in low areas. ● In its natural state, propane has no odor. For your safety, an odorant has been added. ● Contact with propane could cause freeze burns to the skin. ● This grill is shipped from the factory for propane gas use only. ● Never use a propane cylinder with a damaged body, valve, collar or footing. ● Dented or rusted propane cylinders may be hazardous and should be checked by your propane gas supplier. CAUTION ● It is essential to keep the grill’s valve compartment, burners and circulating air passages clean. ● Inspect the grill before each use. Step 1. Inspect all hoses and connections and make certain they are secure. ...
-
Page 6: Illustrated Parts List
Illustrated Parts List Part Description Part Description Bottom panel 1 PC Grill body 1 PC Left lower frame 1 PC burner 1 PC Front lower panel 1 PC Grease cup 1 PC Right lower frame 1 PC 1 PC Wheel axle 1 PC Lid handle 1 PC... -
Page 7: Hardware List
Hardware List M6 x 15 Washer M5 8 pcs Heat Insulation M6 x 10 2 pcs 8 pcs Washer 5mm M6 x 50 Nut M5 8 pcs Heat resistant Washer M6 30 pcs 2 pcs washer 30mm Washer M6 24 2 pcs M5 x10 4 pcs... -
Page 8: Assembly Instructions
Assembly Instructions Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is fully assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver provided if necessary. - Page 9 Step 6 a) Align the holes on body hinge (P) with the holes on the grill body, then screw a bolt (II), along with a heat insulation washer (LL) into the pre‐drilled hole, and then seal with a flat washer (KK), a lock washer(JJ) and a wing nut (MM). Tighten by hand until secure. b) Align the holes on grill body with the holes on the upper frame, then screw a bolt (AA), along with a lock washer (DD) and a flat washer (EE) into each pre‐drilled hole. Tighten by hand until secure. c) Tighten all bolts by screwdriver until secure. Step 7 a) Put the burner (R) inside the grill body. Make certain the valve nozzle is inserted into the burner venturi tube properly and completely. b) Align the holes on heat insulation panel (AE) with the holes under the bottom of grill body. c) Screw a bolt (BB), along with a lock washer (DD) and a flat washer (GG) through the heat insulation panel, the bottom of grill body and into the burner. Tighten by hand until secure. d) Connect the ignition wire with the igniter. e) Tighten all bolts by screwdriver until secure. f) Hook the grease cup (S) under the grill body. ...
- Page 10 Step 11 a) Put the heating plate (Y) onto the heating plate support. b) Put the cooking grid (Z) onto the heating plate. c) Insert the feet of warming rack (AB) into the holes on the top lid. Step 12 a) Put the gas tank on the tank support. b) Connect the regulator with the tank. c) Insert the tank clip (AC) into the holes on the bottom panel and clip the tank using the tank clip. Fully Assembled View ...
-
Page 11: Operating Your Grill
Operating Your Grill CAUTION Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of unauthorized parts can create an unsafe condition and environment. The liquid propane gas (LP-gas) supply cylinder(s) to be used must be: a) Constructed and marked in accordance with the specifications for LP gas cylinders of the National Standard of the Transportation of Dangerous Goods Commission of Canada for Cylinders, Spheres and Tubes (CAN/CSA-B139), as applicable;... -
Page 12: Checking For Leaks
Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Install only the type of dust cap on cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane. DANGER To prevent fire or explosion hazard when testing for a leak: Always perform the “leak test“ as below before lighting the grill and each time the cylinder is connected for use. Do not smoke or allow other sources of ignition in the area while conducting a leak test. Conduct the leak test outdoors in a well‐ventilated area. Do not use matches, lighters or a flame to check for leaks. Do not use grill until all leaks have been stopped. If you are unable to stop a leak, disconnect the propane supply, call for gas appliance service or your local propane gas supplier. Checking for Leaks Make 2‐3 oz. of leak solution by mixing one part liquid dishwashing soap with three parts water. Make sure control knobs are in the “OFF” position. Spray some solution on the tank valve up to the regulator connection. (See diagram to right.) Inspect the solution at the connections for bubbles. If no bubbles appear, the connection is secure. If bubbles appear, you have a leak. Proceed to step 6. Disconnect the regulator from the tank and reconnect. Make sure the connection is secured. Retest with solution. If you continue to see bubbles, replace the cylinder. Lighting Your Grill DANGER Failure to open lid while igniting the grill’s burners or not waiting five minutes to allow gas to clear if the grill does not light, may result in an explosion, which could cause serious bodily injury or death. WARNING Never stand with your head directly over the grill when preparing to light the main burners, to prevent possible bodily injury. Lighting Main Burner WARNING: Attempting to light the burner with the lid closed may cause an explosion. Make sure there are no obstructions of airflow to the gas unit. Spiders and insects can nest and clog the burner/venturi tube at the orifice. A clogged burner tube can lead to a fire beneath the appliance. 1. Open lid while lighting burners. 2. - Page 13 3. Press the valve knob and rotate it counterclockwise to the ‘’HIGH’’ position. The burner should light immediately. If more than one burner is desired, repeat the Steps 2 and 3 until all desired burners are lit. 4. Adjust burners to the desired cooking temperature. PRECAUTIONS: 1. Before cooking on the grill for the first time, operate the grill for approximately 15 minutes with the lid closed and the gas turned on “HIGH”. This will “heat clean” the internal parts, dissipate odor from the manufacturing process and painted finish. 2. After lighting, observe the burner flame. Make sure all burner ports are lit. 3. If the burner flame goes out during operation, immediately turn the gas “OFF”. Open lid to let the gas clear for at least 5 minutes before re‐lighting. 4. Clean the grill after each use. DO NOT use abrasive or flammable cleaners. This may damage parts of the grill and cause a fire. Confirm that the burner is properly lit and that the flame pattern is as desired (see fig. A,B and C below for the proper flame patterns). If the flame pattern is other than normal, consult the Troubleshooting for corrective action. FIG. A FIG. B FIG. C Normal: Soft blue flames with yellow tips Poor combustion: Wavy, yellow Out of adjustment: Noisy hard blue between 1 inch – 2 inches high flames – too little air flames – too much air Burner installation and adjustment WARNING DO NOT Adjust the air‐shutter on burner tube while the grill is operating. If the grill is still hot, please wear protective gear and ...
-
Page 14: Excess Flow Safety Valve Reset Procedure
WARNING Always monitor the grill closely when cooking and turn the flame level down to LOW or OFF if flare‐ups intensify. Shutting Off Burners 1. Always turn the valve knob(s) clockwise to the ‘’HIGH’’ position, and then press and turn it to ‘’OFF’’. Never force the knob without pressing it. This could damage the valve. 2. Promptly turn the gas supply to the “OFF” position at the propane cylinder. 3. Close the lid of the grill. Excess Flow Safety Valve Reset Procedure ● The new regulators are equipped with a safety device that restricts the gas flow in the event of a gas leak. However, unsafe practices of grill operation could activate the safety device without having a gas leak. ● A sudden shut off of the gas flow typically occurs if you open the liquid propane (LP) tank valve rapidly, or if one or more of the burner control knobs is in an open position when opening the LP tank valve. ● This procedure is effective with all sizes of LP tank. ● To ensure the procedure is safely and successfully performed, please carefully follow these instructions: 1. Close the LP tank valve. 2. Turn all burner control knobs to the OFF position. 3. Disconnect the regulator from the LP tank. 4. Open the lid of the grill. 5. Turn burner control knobs to HIGH. 6. Wait at least 1 minute. 7. Turn burner control knobs OFF. 8. -
Page 15: Care And Maintenance
Care and Maintenance IMPORTANT Always allow to completely cool off before covering your grill to prevent corrosion from condensation. CAUTION All cleaning and maintenance should be done when the grill is cool, with the fuel supply turned off at the control dial and the propane cylinder disconnected. DO NOT clean any grill part in a self‐cleaning oven. The extreme heat will damage the finish. Cleaning Burning off the grill after every use (approx. 15 minutes) will keep excessive food residue from building up. Clean the grill before and after cooking is recommended. Recommended cleaning materials Mild dishwashing liquid detergent Hot water Nylon cleaning pad ... -
Page 16: Troubleshooting
TROUBLESHOOTING Problem Possible cause Prevention/Cure Burner doesn't light using knobs Wires or electrode is covered Clean wire or electrode by or igniter by cooking residue rubbing alcohol e l i Replace electrode sparks at crack Burner doesn't light using a No gas flow Check if propane tank is empty. - Page 17 l i r n i l Persistent grease fire Grease trapped by food was Turn knobs to OFF. Turn gas filled up to burner system OFF at propane tank. Leave lid in closed position and let fire burn out. After grill cools, remove and clean all parts Flashback(fire in burner tubes) Burners or tubes are block...
-
Page 18: Warranty Program
Warranty Program Proof of purchase is required to access this warranty program, which is in effect from the date of purchase. If unable to provide proof of purchase or after the warranty has expired, customers will be subject to parts, shipping and handling fees. Full 30‐Day Warranty Any missing parts can be replaced at no charge within 30 days from the date of purchase with a valid proof of purchase.