Installing/Removing Dvd-Rom - Silicon Graphics InfiniteStorage 3104 User Manual

Installing/Removing DVD-ROM

007-6307-001
The top cover of the chassis must be opened to gain full access to the DVD-ROM drive bay. The
chassis supports only slim-line DVD-ROM drives and side-mounting brackets are needed to
mount a slim-line DVD-ROM drive.
To remove a DVD-ROM, use the following procedure:
1. Power down the system.
2. Remove the chassis cover.
See "Removing the Chassis Cover" on page
3. Unplug the power and data cables from the drive you want to remove.
4. Locate the locking tab at the rear of the drive.
It will be on the left side of the drive when viewed from the front of the chassis.
5. Pull the tab away from the drive and push the drive unit out of the front of the chassis.
To add a new drive, follow this procedure in reverse order. You may hear a faint click of the
locking tab when the drive is fully inserted.
Installing/Removing DVD-ROM
29.
35