B.
007-6307-001
Appendix B
BIOS Error Codes
During Power-On Self-Test (POST) routines, which are performed each time the system is
powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process.
The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up procedure. If a fatal
error occurs, you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps. The numbers on
the fatal error list correspond to the number of beeps for the corresponding error.
Table B-1
BIOS Error Codes
Beep Code
1 beep
5 short beeps + 1 long beep Memory error
5 long + 2 short beeps
1 continuous beep with the
front panel OH LED on
Error Message
Refresh
Display memory read/write
error
System Overheat
Description
Circuits have been reset. Ready to power up.
No memory detected in the system
Video adapter missing or with faulty
memory
System overheat
47
Need help?
Do you have a question about the InfiniteStorage 3104 and is the answer not in the manual?
Questions and answers