Circuit Overloading; Reliable Ground; Installing The System Into A Rack - Silicon Graphics InfiniteStorage 3104 User Manual

3: Server Installation

Circuit Overloading

Reliable Ground

Installing the System into a Rack

14
Consideration should be given to the connection of the equipment to the power supply circuitry
and the effect that any possible overloading of circuits might have on overcurrent protection and
power supply wiring. Appropriate consideration of equipment nameplate ratings should be used
when addressing this concern.
A reliable ground must be maintained at all times. To ensure this, the rack itself should be
grounded. Particular attention should be given to power supply connections other than the direct
connections to the branch circuit (for example, the use of power strips).
This section provides information on installing the server into a rack. There are a variety of rack
units on the market, which may mean the assembly procedure will differ slightly. You should also
refer to the installation instructions that came with the rack unit you are using.
007-6307-001