Safety Instructions 6 8.1 General; Symbols - REMEHA Gas 310 ECO Technical Information

1 SAFETY INSTRUCTIONS

1.1 Symbols

The following symbols are used in this document to
emphasise certain instructions. This is in order to
increase your personal safety and to safeguard the tech-
nical reliability of the boiler.
g
Instructions must be followed closely to avoid
personal injury or serious damage to the unit or the
environment.
g
Important!!
Instructions are of essential
importance for the correct functioning of the unit.
w
Indicates possible danger of electric shock. Seri-
ous personal injury may occur.
i
Instructions contain useful information.
Read and familiarise yourself with these instruc-
tions.
General Instructions
Keep unauthorised personnel away from the boiler. Do
not place objects on or against the boiler. Do not touch
hot water connections or the flue outlet when the boiler
is operating – burn hazard.
w
Danger
This boiler is connected to a 230v mains supply. An
improper installation or attempts to repair electrical com-
ponents or controls may result in life threatening situa-
tions.
g
Be aware of gas escapes
If you smell gas, close the (main) gas cock and contact
the emergency gas leak telephone number for your
area. DO NOT ISOLATE THE POWER SUPPLY TO
THE BOILER OR ANY OTHER APPLIANCE.
Supplied By www.heating spares.co Tel. 0161 620 6677
Remeha Gas 310 ECO
g
Be aware of flue gas leaks
If you smell flue gas fumes, turn the boiler off and con-
tact your service company or installer.
g
Be aware of water leaks
If you see water leaking from the boiler, turn it off and
contact your Service Company or installer.
g
Working on the boiler
Installation, commissioning, maintenance and repair
work must only be carried out by suitably qualified spe-
cialist. Engineer in accordance with all relevant national/
local standards and certifications.
Always disconnect the mains supply and close the main
gas cock before working on the boiler.
Casing panels should only be removed for mainte-
nance and servicing purposes.
Refit all panels on completion of maintenance or servic-
ing before putting the boiler back into service.
Instruction and warning labels on the boiler must
never be removed or covered and must be clearly leg-
ible throughout the entire service life of the boiler. Dam-
aged or illegible instruction and warning labels must be
replaced immediately.
Generally applicable safety instructions related to acci-
dent prevention must be consulted in addition to the
information supplied in this technical documentation.
Boiler modifications and spare parts
The boiler must not be modified or non-Remeha spare
parts fitted without the express written approval of
Remeha.
6