Controlling Relays - Siemens HiPath 3000 Operating Instructions Manual

Special Functions in the LAN (PC network)
Step by Step
56

Controlling Relays

If this feature is configured (contact System Support),
you can also control relays Æ page 45 in other
HiPath 3000 communications platforms.
Lift the handset.
Enter the code.
Enter the (DISA) call number of the HiPath 3000 in
which the relay is to be controlled.
Enter.
Enter the (DISA) call number of the telephone from
which you wish to control the relay.
Enter.
or Enter the code for "on" or "off".
... Enter the relay.