Siemens HiPath 3000 Operating Instructions Manual page 11

Step by Step
Consultation
Consultation
Consultation
or
or
Accept a waiting call (camp-on)
Precondition: You are engaged in a phone call and hear
a tone (every six seconds).
Ending the first call and answering the waiting call:
Replace the hand set. Your telep hone rings.
Answer the second call. Lift the handset.
Placing the first call on hold and answering the sec-
ond call:
Press the key. LED flashes. Enter the code.
You are connected to the call waiting party immediately.
The first party is placed on hold.
Ending the second call and resuming the first one:
Press this key and wait two seconds.
or (depending on the configuration)
Press the key t wice.
Preventing and Allowing Call Waiting
(Automatic Camp-On)
If this function has been configured (ask your service
technician), you can prevent or allow a second call
Æ page 10 from being signaled by automatic camp-on
during an ongoing call.
Lift the handset.
Enter the code to "prevent" or "allow" call waiting .
Turning the Call Waiting Tone On and Off
You can suppress the call waiting tone (approx. every
six seconds) for external calls. A one-time special dial
tone then alerts you to the waiting call.
Lift the handset.
Enter code for "tone off" or "tone on".
Making and Answering Calls
11