Answering Calls From The Entrance Telephone And Opening The Door - Siemens HiPath 3000 Operating Instructions Manual

Making and Answering Calls
Step by Step
Consultation
14
Answering Calls from the Entrance
Telephone and Opening the Door
If an entrance telephone has been programmed, you
can use your telephone to speak to someone at the
entrance telephone and to activate a door opener.
If you are authorized to activate a door opener (contact
System Supp ort), visitors can open the door
themselves by entering a 5-digit code (using a DTMF
transmitter or installed keypad ).
Speaking to visitors via the entrance telephone:
Precondition: Your telephone rings.
Lift the handset within thirty seconds. You are connect-
ed to the entrance telephone immediately.
or
Lift the handset after more than thirty seconds.
Dial the entrance telephone number.
Opening the door from your telephone during a call
from the entrance telephone:
Press the key. LED flashes. Enter the code.
Dial the entrance telephone number.
Special features must be taken into consider-
ation if your telephone operates with HiPath
AllServe (system networking via PC network)
Æ page 57!
Op ening the door with a code (at the door):
After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Dep end ing on how the
d oor opener has been p rogrammed, a doorbell call sig-
nal may or may not be forwarded.