Table of Contents
Advertisement
16) Install cap over terminal with 4 screws.
Note: Cap may be painted to match building color.
17) Secure fi restop in place with 4 screws (see step 2).
18) Seal the outer frame with supplied sealant to prevent any water from
entering the building envelope.
Caution: Label all wires prior to disconnection when
servicing controls.
Wiring errors can cause improper and dangerous
Regency Horizon HZ54EPV Gas Fireplace
operation.
PIPE CONNECTION FROM TERMINAL
TO UNIT
The rigid pipe and rigid pipe adaptor starting from the installed unit
must be installed prior to proceeding.
1)
Install 8" or 16" slip section of pipe over fi nal length of rigid pipe.
2)
Install reducer to the end of 8" slip section.
3)
Connect reducer to Power vent terminal - adjust slip section for fi t.
Secure slip section with screws when optimal fi t is achieved.
INSTALLATION
Slip section
Reducer
Connect to
Terminal
Adjust to fi t
25
Advertisement
Table of Contents
