Framing With A Negative Vent Run - Regency Fireplace Products HZ54EPV-NG Owners & Installation Manual

90° elbow 8" slip 18" length
Framing width - offset to one side (left or right)
Framing width - equal on both sides (left or right) (pipe confi guration same as above).
rigid pipe
90° elbow
adaptor
31" (787mm)
Framing depth
Regency Horizon HZ54EPV Gas Fireplace

FRAMING WITH A NEGATIVE VENT RUN

rigid pipe
90° elbow
adaptor
70" (1778mm)
80" (2032mm)
90° elbow
Note: Rigid pipe adaptor and 2 x 90° elbows required to achieve minimum clearances.
Note: Framing height and width remain the same as previous page.
INSTALLATION
Parts required
1 rigid pipe adaptor
1 18" pipe length
1 8" slip
2 90° elbows
Note: Framing height and depth remain the same as
previous page.
15