Table of Contents
Advertisement
INSTALLATION
Important: 120 Volt AC power is needed for the fan switch and blower.
The receptacle box will be installed on the left hand side of the unit
and must be wired by a qualifi ed electrician prior to fan
assembly being installed. The neutral(wider) slot of the polarized
receptacle should be at the top.
1) Turn the unit off and allow it to cool down to room temperature.
2) Turn off the gas supply to the unit.
3) Remove the faceplate by lifting it up off the hinges on the sides of the
fi rebox.
4) Remove the door frame overlay by swinging out 45
lift up and out.
48
OPTIONAL FAN INSTALLATION
o
from the bottom and
5) Remove the glass door.
a) Remove cover plates from over each screw by pulling away from
magnets each as shown below.
Cover Plate
b) Remove the 3 screws shown below at the bottom of the glass
.
door
o
c) Swing the door out 45
from the bottom and lift up and out.
Magnet
Diagram 4
Regency Horizon HZ54EPV Gas Fireplace
Advertisement
Table of Contents
