Minimum Clearances To Combustibles - Regency Fireplace Products Regency Gi29LU Owners & Installation Manual

Gas insert
Table of Contents

Advertisement

Minimum Clearances to Combustibles

The clearances listed below are minimum distances unless otherwise stated.
A major cause of fires is failure to maintain required clearances (airspace) to combustible materials. It is of the greatest importance that this decorative gas
appliance is installed only in accordance with these instructions.
Clearance
A: Sidewall
B: Ceiling
63-3/4" / 1873 mm
D: Min. Hearth Depth
E: Min. Hearth Length
K: Min. Alcove Width
54" / 1372 mm
L: Max. Alcove Depth
M: Mantel Deflector
2-1/2"/ 89 mm*
• A 36" (914 mm) wide x 12" (305 mm) deep, non-combustible hearth
is required in front of the appliance unless the unit is raised 3" (76 mm) off the floor.
• *An optional 2-1/2" (64 mm) mantel deflector reduces the mantel height to 13" (330 mm) from
the top of the unit @ 1" (25 mm) depth.
• (J): ***Measured from the inside edge of the faceplate/doors - reference only: 27-1/4'' (692 mm)
B
D
Dimension
8" / 203 mm
***From inside edge of faceplate / doors
From base of unit
12" / 305 mm
Not required if unit raised 3" (76 mm) off the
floor.
36"/ 914 mm
Not required if unit raised 3" (76 mm) off the
floor.
36" / 914 mm
From the front of the unit.
J***
E
K
Diagram 1
Measured From:
A
L
Gi29 Direct Vent Gas Insert |
installation
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Regency gi29lu-ngRegency gi29lu-lp

Table of Contents