Table 262 Maintenance > Report > Session Monitor - ZyXEL Communications ZyWALL USG 300 User Manual

The following table describes the labels in this screen.
Table 262 Maintenance > Report > Session Monitor
LABEL
View
Refresh
User
Service
Source
Address
Destination
Address
Search
Active Sessions
sessions per
page
User
Service
Source
Destination
Rx
Tx
ZyWALL USG 300 User's Guide
DESCRIPTION
Select how you want the information to be displayed. Choices are:
sessions by users - display all active sessions grouped by user
sessions by services - display all active sessions grouped by service or protocol
sessions by source IP - display all active sessions grouped by source IP address
sessions by destination IP - display all active sessions grouped by destination IP
address
all sessions - filter the active sessions by the User, Service, Source Address,
and Destination Address, and display each session individually (sorted by user).
Click this button to update the information on the screen. The screen also refreshes
automatically when you open and close the screen.
The User, Service, Source Address, and Destination Address fields display if
you view all sessions. Select your desired filter criteria and click the Search button
to filter the list of sessions.
This field displays when View is set to all sessions. Type the user whose sessions
you want to view. It is not possible to type part of the user name or use wildcards in
this field; you must enter the whole user name.
This field displays when View is set to all sessions. Select the service or service
group whose sessions you want to view. The ZyWALL identifies the service by
comparing the protocol and destination port of each packet to the protocol and port
of each services that is defined. (See
about services.)
This field displays when View is set to all sessions. Type the source IP address
whose sessions you want to view. You cannot include the source port.
This field displays when View is set to all sessions. Type the destination IP
address whose sessions you want to view. You cannot include the destination port.
This button displays when View is set to all sessions. Click this button to update
the information on the screen using the filter criteria in the User, Service, Source
Address, and Destination Address fields.
This is the total number of active sessions that matched the search criteria.
Select the number of active sessions displayed on each page. You can use the
arrow keys on the right to change pages.
This field displays the user in each active session.
If you are looking at the sessions by users (or all sessions) report, click + or - to
display or hide details about a user's sessions.
This field displays the protocol used in each active session.
If you are looking at the sessions by services report, click + or - to display or hide
details about a protocol's sessions.
This field displays the source IP address and port in each active session.
If you are looking at the sessions by source IP report, click + or - to display or hide
details about a source IP address's sessions.
This field displays the destination IP address and port in each active session.
If you are looking at the sessions by destination IP report, click + or - to display or
hide details about a destination IP address's sessions.
This field displays the amount of information received by the source in the active
session.
This field displays the amount of information transmitted by the source in the active
session.
Chapter 48 Reports
Chapter 38 on page 595 for more information
721