User/Group; Chapter 36 User/Group; Overview; What You Can Do Using The User/Group Screens - ZyXEL Communications ZyWALL USG 300 User Manual

C
H A P T E R

36.1 Overview

This chapter describes how to set up user accounts, user groups, and user settings for the
ZyWALL. You can also set up rules that control when users have to log in to the ZyWALL
before the ZyWALL routes traffic for them.

36.1.1 What You Can Do Using The User/Group Screens

• The User screen (see
• The Group screen (see
In addition, this screen allows you to add, edit, and remove user groups. User groups may
consist of access users and other user groups. You cannot put admin users in user groups
• The Setting screen (see
lockout settings, and other user settings for the ZyWALL. You can also use this screen to
specify when users must log in to the ZyWALL before it routes traffic for them.

36.1.2 What You Need To Know About User/Groups

User Account
A user account defines the privileges of a user logged into the ZyWALL. User accounts are
used in firewall rules and application patrol, in addition to controlling access to configuration
and services in the ZyWALL.
User Types
These are the types of user accounts the ZyWALL uses.

Table 190 Types of User Accounts

TYPE
Admin Users
Admin
Limited-Admin
Access Users
User
ZyWALL USG 300 User's Guide
Section 36.2 on page 577) provides a summary of all user accounts.
Section 36.3 on page
Section 36.4 on page
ABILITIES
Change ZyWALL configuration (web, CLI)
Look at ZyWALL configuration (web, CLI)
Perform basic diagnostics (CLI)
Access network services
Browse user-mode commands (CLI)
36

User/Group

580) provides a summary of all user groups.
581) controls default settings, login settings,
LOGIN METHOD(S)
WWW, TELNET, SSH, FTP,
Console, Dial-in
WWW, TELNET, SSH, Console,
Dial-in
WWW, TELNET, SSH
575