Figure 28 Registration; Table 13 Registration - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 4 Wizard Setup
This screen displays a read-only user name and password if the ZyWALL is already registered.
It also shows which trial services are activated (if any). You can still select the unchecked trial
service(s) to activate it after registration. Use the Registration > Service screen to update your
service subscription status.

Figure 28 Registration

The following table describes the labels in this screen.

Table 13 Registration

LABEL
Device Registration
new myZyXEL.com
account
existing myZyXEL.com
account
UserName
Check
Password
Confirm Password
E-Mail Address
Country Code
90
DESCRIPTION
If you select existing myZyXEL.com account, only the User Name and
Password fields are available.
If you haven't created an account at myZyXEL.com, select this option and
configure the following fields to create an account and register your
ZyWALL.
If you already have an account at myZyXEL.com, select this option and enter
your user name and password in the fields below to register your ZyWALL.
Enter a user name for your myZyXEL.com account. The name should be
from six to 20 alphanumeric characters (and the underscore). Spaces are not
allowed.
Click this button to check with the myZyXEL.com database to verify the user
name you entered has not been used.
Enter a password of between six and 20 alphanumeric characters (and the
underscore). Spaces are not allowed.
Enter the password again for confirmation.
Enter your e-mail address. You can use up to 80 alphanumeric characters
(periods and the underscore are also allowed) without spaces.
Select your country from the drop-down box list.
ZyWALL USG 300 User's Guide