Chapter 28 Application Patrol
Table 142 AppPatrol > Other > Edit (continued)
LABEL
Maximize
Bandwidth
Usage
Log
OK
Cancel
28.5 Application Patrol Statistics
This screen displays a bandwidth usage graph and statistics for selected protocols.
Click AppPatrol > Statistics to open the following screen.
28.5.1 Application Patrol Statistics: General Setup
Use the top of the AppPatrol > Statistics screen to configure what to display.
Figure 335 AppPatrol > Statistics: General Setup
The following table describes the labels in this screen.
Table 143 AppPatrol > Statistics: General Setup
LABEL
Refresh Interval
Display
Protocols
28.5.2 Application Patrol Statistics: Bandwidth Statistics
The middle of the AppPatrol > Statistics screen displays a bandwidth usage line graph for the
selected protocols.
442
DESCRIPTION
Enable maximize bandwidth usage to let the traffic matching this policy "borrow"
any unused bandwidth on the out-going interface.
After each application or type of traffic gets its configured bandwidth rate, the
ZyWALL uses the fairness- based scheduler to divide any unused bandwidth on
the out-going interface amongst applications and traffic types that need more
bandwidth and have maximize bandwidth usage enabled.
This field controls what kind of record the ZyWALL creates when traffic matches
this policy. Please see
Chapter 47 on page 705
no - the ZyWALL does not record anything
log - the ZyWALL creates a record in the log
log alert - the ZyWALL creates an alert
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Select how often you want the statistics display to update.
Select the protocols for which to display statistics.
Select All selects all of the protocols.
Clear All clears all of the protocols.
Click Expand to display individual protocols. Collapse hides them.
Statistics for the selected protocols display after you click Apply.
for more information.
ZyWALL USG 300 User's Guide