L2Tp Vpn Session Monitor Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 27 L2TP VPN
Table 122 VPN > IPSec VPN > VPN Connection (continued)
LABEL
Authentication
Method
Allowed User
Keep Alive
Timer
First DNS Server
Second DNS
Server
First WINS
Server, Second
WINS Server
Apply
Reset

27.3 L2TP VPN Session Monitor Screen

Click VPN > L2TP VPN > Session Monitor to open the following screen. Use
this screen to display and manage the ZyWALL's connected L2TP VPN sessions.
Figure 268 VPN > L2TP VPN > Session Monitor
410
DESCRIPTION
Select how the ZyWALL authenticates a remote user before allowing
access to the L2TP VPN tunnel.
The authentication method has the ZyWALL check a user's user name
and password against the ZyWALL's local database, a remote LDAP,
RADIUS, a Active Directory server, or more than one of these. See
Chapter 42 on page 661
objects.
The remote user must log into the ZyWALL to use the L2TP VPN tunnel.
Select a user or user group that can use the L2TP VPN tunnel. Select
Create Object to configure a new user account (see
page 618 for details). Otherwise, select any to allow any user with a
valid account and password on the ZyWALL to log in.
The ZyWALL sends a Hello message after waiting this long without
receiving any traffic from the remote user. The ZyWALL disconnects the
VPN tunnel if the remote user does not respond.
Specify the IP addresses of DNS servers to assign to the remote users.
You can specify these IP addresses two ways.
Custom Defined - enter a static IP address.
From ISP - use the IP address of a DNS server that another interface
received from its DHCP server.
The WINS (Windows Internet Naming Service) server keeps a mapping
table of the computer names on your network and the IP addresses
that they are currently using.
Type the IP addresses of up to two WINS servers to assign to the
remote users. You can specify these IP addresses two ways.
Click Apply to save your changes in the ZyWALL.
Click Cancel to start configuring this screen afresh.
for how to create authentication method
ZyWALL USG 2000 User's Guide
Section 37.2.1 on