Introducing Idp Profiles; Base Profiles; Figure 346 Anti-X > Idp > General > Add; Table 153 Anti-X > Idp > General > Add - ZyXEL Communications ZyWALL USG 300 User Manual

Figure 346 Anti-X > IDP > General > Add
The following table describes the screens in this screen.
Table 153 Anti-X > IDP > General > Add
LABEL
Enable
From
To
IDP Profile
OK
Cancel

30.3 Introducing IDP Profiles

An IDP profile is a set of packet inspection signatures.
Packet inspection signatures examine packet content for malicious data. Packet inspection
applies to OSI (Open System Interconnection) layer-4 to layer-7 contents. You need to
subscribe for IDP service in order to be able to download new signatures.
In general, packet inspection signatures are created for known attacks while anomaly detection
looks for abnormal behavior (see
detection).

30.3.1 Base Profiles

The ZyWALL comes with several base profiles. You use base profiles to create new profiles.
In the Anti-X > IDP > Profile screen, click the Add icon to display the following screen.
ZyWALL USG 300 User's Guide
DESCRIPTION
Select this check box to turn on this IDP profile to traffic direction binding.
Traffic direction is defined by the zone the traffic is coming from and the zone
the traffic is going to.
Use the From field to specify the zone from which the traffic is coming.
Use the To field to specify the zone to which the traffic is going.
Select an IDP profile to apply to the entry's traffic direction. Configure the IDP
profiles in the IDP profile screens.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
Chapter 31 on page 493
Chapter 30 IDP
for information on anomaly
467