The Application Patrol Edit Screen; Figure 331 Application Edit; Table 139 Application Edit - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 28 Application Patrol
Table 138 AppPatrol > Common (continued)
LABEL
Apply
Reset

28.3.1 The Application Patrol Edit Screen

Use this screen to edit the settings for an application. To access this screen, go to the
application patrol Common, Instant Messenger, Peer to Peer, VoIP, or Streaming screen
and click an application's Edit icon. The screen displayed here is for the MSN instant
messenger service.

Figure 331 Application Edit

The following table describes the labels in this screen.

Table 139 Application Edit

LABEL
Service
Enable
Service
Service
Identification
Name
Classification
Service Port
434
DESCRIPTION
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Select this check box to turn on patrol for this application.
This field displays the name of the application.
Specify how the ZyWALL should identify this application. Choices are:
Auto - the ZyWALL identifies this application by matching the IP payload with the
application's pattern(s).
Service Ports - the ZyWALL identifies this application by looking at the destination
port in the IP header.
This is available if the Classification is Service Ports. You can view and edit the
ports used to identify this application.
ZyWALL USG 300 User's Guide