Port Grouping Screen; Figure 119 Port Grouping Example: Network; Figure 120 Port Grouping Example: Screen - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 10 Interface

Figure 119 Port Grouping Example: Network

In this case, click

Figure 120 Port Grouping Example: Screen

There are no ports assigned to ge4. If you do not assign any physical ports to a representative
interface, you cannot use this interface to create other interfaces or create IPSec VPN tunnels.
The Ethernet interface is still displayed in the screen, however, and the existing configuration
remains.

10.3.2 Port Grouping Screen

Define the relationship between physical ports, port groups, and Ethernet interfaces in the
Port Grouping screen. To access this screen, click Network > Interface > Port Grouping.
186
Network > Interface > Port Grouping, and set up the screen like this.
ZyWALL USG 300 User's Guide