Chapter 31 ADP
The following table describes the screens in this screen.
Table 165 Anti-X > ADP > General > Add
LABEL
Enable
From
To
ADP Profile
OK
Cancel
31.3 The Profile Summary Screen
Use this screen to:
• Create a new profile using an existing base profile
• Edit an existing profile
• Delete an existing profile
31.3.1 Base Profiles
The ZyWALL comes with base profiles. You use base profiles to create new profiles.
Figure 365 Base Profiles
496
DESCRIPTION
Select this check box to turn on this anomaly profile to traffic direction policy.
Traffic direction is defined by the zone the traffic is coming from and the zone
the traffic is going to.
Use the From field to specify the zone from which the traffic is coming.
Select ZyWALL to specify traffic coming from the ZyWALL itself.
Use the To field to specify the zone to which the traffic is going.
Select ZyWALL to specify traffic destined for the ZyWALL itself.
From LAN To LAN means packets traveling from a computer on one LAN
subnet to a computer on another LAN subnet via the ZyWALL's LAN zone
interfaces. The ZyWALL does not check packets traveling from a LAN
computer to another LAN computer on the same subnet.
From WAN To WAN means packets that come in from the WAN zone and the
ZyWALL routes back out through the WAN zone.
An ADP profile is a set of ADP rules with configured activation, log and action
settings. Select an ADP profile to apply to the entry's traffic direction. Configure
the ADP profiles in the ADP profile screens.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
ZyWALL USG 300 User's Guide