Table of Contents
Advertisement
SECTION 3
Configure Network Access
After the camera is powered on, an initial network configuration setup should be performed. This procedure includes:
Installing the ALIBI Discover tool
•
Setting up the camera network configuration
•
For more information about configuring your ALIBI camera, refer to the ALIBI™ IP Camera Software User Manual provided on
the software and documentation CD with your camera.
Step 1. Install the ALIBI Discover Tool
The ALIBI Discover Tool is a software utility used to "discover" ALIBI cameras and NVRs/DVRs installed on the LAN and change their
network settings. The tool is provided on the CD with your camera. To use the tool:
1. Insert the software CD provided with your camera into an optical drive on the Microsoft Windows computer you will use to
access your camera on the LAN.
2. On the CD, find the folder that contains the ALIBI Discover Tool.
3. Copy the files in the folder to a new directory on your computer. The files should appear as shown in the directory shown
below.
4. To open the ALIBI Discover Tool, double click the file ALIBI Discover Tool.exe. The tool will automatically discover ALIBI
cameras and recorders installed on the network.
ALI-IPZ5030 Series IP PTZ Camera Installation Guide
SECTION 3: CONFIGURE NETWORK ACCESS
17
Advertisement
Table of Contents
