SECTION 2: INSTALLATION
Pendant adapter
set screw
Wrap with
thread tape
Pendant adapter
5. Screw the pendant adapter onto the end of the mounting bracket. Tighten the set screw to secure the adapter to the bracket.
6. Clip one end of the safety cable to the tab on the top of the camera assembly.
7. Route the camera drop cable through the mounting bracket, then clip the safety cable onto the loop in the mounting bracket.
Pendant adapter
Align
marks
Back box
8. Fit the camera coupling into the pendant adapter, then twist the camera to align the marks on the pendant adapter and the
camera back box. See the figure above.
9. Tighten the two lock screws on the pendant adapter to secure the camera to the mounting bracket.
10. Feed the camera drop cable through hole drilled at the mounting location, then anchor the mounting bracket to the wall.
12
Attach pendant adapter to mounting bracket
Pendant
adapter
Coupling
Bracket
Loop for
safety cable
Lock screw (2)
Drop cable
Safety cable