Remove The Packaging From The Camera; Remove Ali-Ipz5030T Packaging - ALIBI ALI-IPZ5030T Installation Manual

2.1 Remove the packaging from the camera

2.1.1 Remove ALI-IPZ5030T packaging
1. Remove the camera from the shipping box and protective plastic bag.
1. Loosen the two lock screws as shown in the following figure.
2. Remove the lower dome and remove the protective foam and tape shown below. Be very careful not to touch the camera lens.
3. Reattach the lower dome.
Back
box
Lock
screw
Lower
dome
ALI-IPZ5030T camera assembly
Protective tape
Protective foam
Remove protective foam
ALI-IPZ5030 Series IP PTZ Camera Installation Guide
SECTION 2: INSTALLATION CESS
Lock
screw
9