Connecting The Cables - ALIBI ALI-IPZ5030T Installation Manual

SECTION 2: INSTALLATION

2.5 Connecting the cables

Drop cables for the ALI-IPZ5030T and ALI-IPZ5030RT are the same. However, the power requirements for differ.
Connect the camera to other devices as needed in the order shown below.
Alarm Output cables
The alarm output drop cable provides four wires, OUT1 and COM1 (common), and OUT2 and COM2. These wires are color coded and
labeled.
Alarm Input cables
The alarm input drop cable provides eight wires, ALARM_IN1 .. ALARM_IN7, and GND (ground). These wires are color coded and
labeled.
Audio cable
The Audio drop cable provides three wires: Audio In, Audio Out, and ground. These wires are color coded and labeled.
Connect the Audio In and ground wires to a line level audio input source. The input signal must be 2 ~ 2.4 Vp-p at 1 KΩ ± 10%
input impedance.
14
Drop cable bundle
Network (LAN) cable
Audio cable
Alarm Output cables
Alarm Input cables
RS-485 cable
Video cable
Power cable (24 Vac)