Operating
7
Operating
7.1 Starting up the device
7.2 Main menu
22
Connect the unit to the power grid to start the operation. After a few seconds, the display
shows a running reset. The unit is then ready for use.
Press [Mode] to activate the main menu and to select an operating mode. Use [Up] and [Down]
to change the respectively indicated value. When the display shows the desired value, press
[Mode].
If you don't press any button for about 30 seconds, the current setting is being applied and the
display turns dark. The set values are retained as long as the unit is connected to the power
supply.
LED floodlight