Table of Contents
Advertisement
Operating
7
Operating
7.1 Operating mode 'Manual'
xBrick Quad 16×8W RGBW
26
LED Floodlight
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
Press [Mode] to activate the main menu and select an operating mode. Use [Setup] to select
further options. Use [Up] and [Down] to change the respectively displayed value. The unit
instantly applies the displayed value, you don't need to push a button for confirmation.
If you don't press any button for about 20 seconds, the current setting will be automatically
applied and the display turns off. The set values are retained as long as the device is connected
to the mains power supply.
This operating mode can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
1.
Press [Mode], use [Up] and [Down] to select the menu option 'Program Mode' and con‐
firm with [Setup].
2.
Use [Up] and [Down] to select the desired programme (01 ... 23) and confirm with
[Setup].
Advertisement
Table of Contents
