Operating
DMX address
26
This setting is only relevant if the unit is controlled via DMX.
Press [Mode] repeatedly until the display shows 'dxxx' .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value between 1 and 512 (the display shows 'd001' ... 'd512' ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the different DMX modes.
Mode
2-channel
3-channel
5-channel
24-channel
Wait for about 30 seconds until the display turns dark. Then the settings have been applied.
Press [Mode] to return to the parent menu without any changes.
LED floodlight
Highest possible DMX address
511
510
508
489