Stairville LED Bar 240/8 RGB User Manual page 25

'Automatic' mode Automatic operation can only be activated if the unit is working in stand-alone mode or as
master device in a master / slave combination. This setting is only relevant if the unit is not
controlled via DMX.
Press [Mode] repeatedly until the display shows 'Auto' . Press [Setup]. Now you can select one
of the Automatic options. Use [Up] and [Down] to select a value between 'n001' and 'n100' .
To adjust the speed of the selected Automatic option, press [Setup] repeatedly until the display
shows 'SPxx' . With [Up] and [Down] you can now select a value between 'SP01' (slow) and
'SP99' (fast) or 'SPFL' (Flash effect).
To adjust the flash frequency, press [Setup] repeatedly until the display shows 'FSxx' . With [Up]
and [Down] you can now select a value between 'FS00' (slow) and 'FS99' (fast).
To adjust the fade speed of the selected Automatic option, press [Setup] repeatedly until the
display shows 'Fdxx' . With [Up] and [Down] you can now select a value between 'Fd00' (slow)
and 'Fd99' (fast).
Wait for about 30 seconds until the display turns dark. Then the settings have been applied.
Press [Mode] to return to the parent menu without any changes.
LED Bar 240/8 RGB
Operating
25