Constant unicoloured pattern
A constant unicoloured pattern can only be activated if the unit is working in stand-alone
mode or as master device in a master / slave combination. This setting is only relevant if the
unit is not controlled via DMX.
Press [Mode] repeatedly until the display shows 'Colr' .
Press [Setup]. With [Up] and [Down] to choose from the following options:
Display
'I--r'
'2-rg'
'3--g'
'4-gb'
'5--b'
'6-rb'
'7rgb'
' OFF'
LED Bar 240/8 RGB
Description
Red
Red and green
Green
Green and blue
Blue
Red and blue
Red, green and blue
LEDs off
Operating
29