‘Preprogrammed Automatic Show’ Mode - Stairville LED Bar 240/8 RGB User Manual

'Preprogrammed automatic
show' mode
A preprogrammed automatic show can only be activated if the unit is working in stand-alone
mode or as master device in a master / slave combination. This setting is only relevant if the
unit is not controlled via DMX.
Press [Mode] repeatedly until the display shows 'Prxx' . Now you can select one of the preprog‐
rammed automatic shows. Use [Up] and [Down] to select a value between 'Pr01' and 'Pr21' .
For programmes Pr20 and Pr21, you can set a static colour (background colour) for all seg‐
ments, or a colour that lights up segmentally (hopping colour). Press [Setup] repeatedly until
the display shows '1xxx' (background colour) or '2xxx' (hopping colour). With [Up] and [Down]
you can toggle between the following options:
Display
'--r'
'-rg'
'--g'
'-gb'
'--b'
LED Bar 240/8 RGB
Description
Red
Red and green
Green
Green and blue
Blue
Operating
23