Dmx Indicator; Connections In Master/Slave Mode - Stairville LED Bar 240/8 RGB User Manual

Starting up

DMX indicator

Connections in master/slave
mode
18
When the display is flashing in 'DMX' mode, no DMX signal is received. Perhaps the DMX con‐
troller is shut down or the wiring is incorrect. If the display lights up solid, the device is
receiving a valid DMX signal.
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
LED floodlight