Table of Contents
Advertisement
NO. Item
24
DMX
25
POWER
26
Warning label
27
Laser output
Notes on operation
Regular breaks during operation are essential to maximize the life of
X
this device as it is not designed for continual use.
Do not switch the unit on and off in short time intervals.
X
Always unplug the unit when it is not going to be used or starting any
X
servicing.
In the event of serious operation problems, stop using the fixture and
X
contact your dealer immediately.
Operating Modes
When the laser is powered on, the LED monitor on rear panel shows the
current operating standalone mode or DMX address, when in DMX mode.
With the help of the LED control panel, it is very easy to set and change
the operating mode of the device. After every resetting and saving, the
new mode information will be shown on the LED monitor at next power on.
Mode/Function option, to choose the operating mode of
the laser.
Confirmation, to confirm all setting or change of LED control
panel.
Function
DMX connection indicated LED. Red is
DMX connected. Green is preprogram
standalone mode.
Indicates that the unit is switched on.
Laser aperture.
Laser output aperture.
DANGER – Laser radiation
When taking this device into operation you have to follow
all instructions given from page 3.
www.thomann.de
13
Advertisement
Table of Contents
